mirror of
https://github.com/PrivSec-dev/privsec.dev
synced 2024-09-20 01:34:43 -04:00
70 lines
2.5 KiB
Markdown
70 lines
2.5 KiB
Markdown
---
|
|
title: "Root ZFS Encryption, Mirroring, and Remote Unlocking on Ubuntu"
|
|
tags: ['Operating Systems', 'Linux', 'Security']
|
|
date: 2023-07-26
|
|
author: Tommy
|
|
---
|
|
|
|
While Unbutu supports ZFS on root filesystems with an easy snapshot and rollback mechanism called ZSYS, ZSYS is [soon going to be deprecated](https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1966773) and the installer does not offer an easy way to setup mirroring. In this guide, I will walk you through how to set up Ubuntu with root on ZFS, mirroring with both the root and EFI partitions, and remote unlocking + boot into a snapshot with ZFSBootMenu.
|
|
|
|
|
|
|
|
## Enter the Shell
|
|
|
|
Enter the shell on your Ubuntu Installer:
|
|
|
|
|
|
|
|
## Partitioning the Disk
|
|
|
|
Esentially, we need a 512MB ESP partition for ZFSBootMenu and a `/` partition for the rest of the system. If you are using a single disk, just make those 2 partitions on your disk. If you are planning to do mirroring, set up both on of these partitions on each disk.
|
|
|
|
There are a variety of tools you can use, but an easy to use one would be `cfdisk`.
|
|
|
|
```bash
|
|
cfdisk /dev/nvme0n1
|
|
cfdisk /dev/nvme0n2
|
|
```
|
|
|
|
|
|
|
|
## Mirroring the ESP partition
|
|
|
|
_Skip this if you are not doing mirroring_
|
|
|
|
While the EFI specs do not support `mdadm`, we can setup mdadm with metadata v1.0, which will be put at the end of the parition and allows it to boot.
|
|
|
|
```bash
|
|
mdadm --create /dev/md0 --level 1 --raid-disks --metadata 1.0 /dev/nvme0n1p1 /dev/nvme0n1p2
|
|
```
|
|
|
|
## Setup the ZFS partition
|
|
|
|
This part is mostly based on the [official ZFSBootMenu guide](https://docs.zfsbootmenu.org/en/v2.2.x/guides/ubuntu/uefi.html) with some changes to work around some not-so-great instructions there.
|
|
|
|
### Creating the zpool
|
|
|
|
#### Getting the Disk ID.
|
|
|
|
First, we must get the disk IDs from `/dev/disk/by-id`. The official guide uses the dynamically assigned drive identifier (`/dev/sda`, `/dev/nvme0n1`, etc), which is not what we want to do with zpools, since it will cause problems later on.
|
|
|
|
|
|
|
|
#### Installing ZFS-Utils
|
|
|
|
```bash
|
|
sudo apt install zfsutils-linux -y
|
|
```
|
|
|
|
#### Create the encryption key
|
|
|
|
```bash
|
|
echo 'SomeKeyphrase' > /etc/zfs/zroot.key
|
|
chmod 000 /etc/zfs/zroot.key
|
|
```
|
|
|
|
#### For non-mirroring setup
|
|
|
|
```bash
|
|
sudo zpool create -o ashift=12 -O compression=zstd -O acltype=posixacl -O xattr=sa -O atime=off -O encryption=on -O keylocation=file:///etc/zfs/zroot.key -O keyformat=passphrase -o autotrim=on -m none zroot /dev/disk/by-id/nvme-SAMSUNG_MZQL21T9HCJR-00A07_XXXXXXX-part2
|
|
``` |