Tomster/Arch-Setup-Script
1
0
Fork 0
mirror of https://github.com/tommytran732/Arch-Setup-Script synced 2024-11-09 04:01:33 -05:00
Code
d17763aaa5
Arch-Setup-Script/install.sh
Tommy 0870a38cce
Unbound for server installs 
Signed-off-by: Tommy <contact@tommytran.io>
2024-06-21 15:40:07 -07:00

604 lines
23 KiB
Bash
Raw Blame History

#!/bin/bash
# Copyright (C) 2021-2024 Thien Tran, Tommaso Chiti
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may not
# use this file except in compliance with the License. You may obtain a copy of
# the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.
output(){
echo -e '\e[36m'"$1"'\e[0m';
}
unpriv(){
sudo -u nobody "$@"
}
# Check if this is a VM
virtualization=$(systemd-detect-virt)
install_mode_selector() {
output 'Is this a desktop or server installation?'
output '1) Desktop'
output '2) Server'
output 'Insert the number of your selection:'
read -r choice
case $choice in
1 ) install_mode=desktop
;;
2 ) install_mode=server
;;
* ) output 'You did not enter a valid selection.'
install_mode_selector
esac
}
luks_prompt(){
if [ "${virtualization}" != 'none' ]; then
output "Virtual machine detected. Do you want to set up LUKS?"
output '1) No'
output '2) Yes'
output 'Insert the number of your selection:'
read -r choice
case $choice in
1 ) use_luks='0'
;;
2 ) use_luks='1'
;;
* ) output 'You did not enter a valid selection.'
luks_prompt
esac
else
use_luks='1'
fi
}
luks_password_prompt () {
if [ "${use_luks}" = '1' ]; then
output 'Enter your encryption password (the password will not be shown on the screen):'
read -r -s luks_password
if [ -z "${luks_password}" ]; then
output 'You need to enter a password.'
luks_password_prompt
fi
output 'Confirm your encryption password (the password will not be shown on the screen):'
read -r -s luks_password2
if [ "${luks_password}" != "${luks_password2}" ]; then
output 'Passwords do not match, please try again.'
luks_password_prompt
fi
fi
}
disk_prompt (){
lsblk
output 'Please select the number of the corresponding disk (e.g. 1):'
select entry in $(lsblk -dpnoNAME|grep -P "/dev/sd|nvme|vd");
do
disk="${entry}"
output "Arch Linux will be installed on the following disk: ${disk}"
break
done
}
username_prompt (){
output 'Enter your username:'
read -r username
if [ -z "${username}" ]; then
output 'You need to enter a username.'
username_prompt
fi
}
user_password_prompt () {
output 'Enter your user password (the password will not be shown on the screen):'
read -r -s user_password
if [ -z "${user_password}" ]; then
output 'You need to enter a password.'
user_password_prompt
fi
output 'Confirm your user password (the password will not be shown on the screen):'
read -r -s user_password2
if [ "${user_password}" != "${user_password2}" ]; then
output 'Passwords do not match, please try again.'
user_password_prompt
fi
}
hostname_prompt (){
if [ "${install_mode}" = 'server' ]; then
output 'Enter your hostname:'
read -r hostname
if [ -z "${hostname}" ]; then
output 'You need to enter a hostname.'
hostname_prompt
fi
else
hostname='localhost'
fi
}
network_daemon_prompt(){
if [ "${install_mode}" = 'server' ]; then
output 'Which network daemon do you want to use'
output '1) networkmanager'
output '2) systemd-networkd'
output 'Insert the number of your selection:'
read -r choice
case $choice in
1 ) network_daemon='networkmanager'
;;
2 ) network_daemon='systemd-networkd'
;;
* ) output 'You did not enter a valid selection.'
install_mode_selector
esac
else
network_daemon='networkmanager'
fi
}
# Set hardcoded variables (temporary, these will be replaced by future prompts)
locale=en_US
kblayout=us
# Cleaning the TTY.
clear
# Initial prompts
install_mode_selector
luks_prompt
luks_password_prompt
disk_prompt
username_prompt
user_password_prompt
hostname_prompt
network_daemon_prompt
# Installation
## Updating the live environment usually causes more problems than its worth, and quite often can't be done without remounting cowspace with more capacity, especially at the end of any given month.
pacman -Sy
## Installing curl
pacman -S --noconfirm curl
## Wipe the disk
sgdisk --zap-all "${disk}"
## Creating a new partition scheme.
output "Creating new partition scheme on ${disk}."
sgdisk -g "${disk}"
sgdisk -I -n 1:0:+512M -t 1:ef00 -c 1:'ESP' "${disk}"
sgdisk -I -n 2:0:0 -c 2:'rootfs' "${disk}"
ESP='/dev/disk/by-partlabel/ESP'
if [ "${use_luks}" = '1' ]; then
cryptroot='/dev/disk/by-partlabel/rootfs'
fi
## Informing the Kernel of the changes.
output 'Informing the Kernel about the disk changes.'
partprobe "${disk}"
## Formatting the ESP as FAT32.
output 'Formatting the EFI Partition as FAT32.'
mkfs.fat -F 32 -s 2 "${ESP}"
## Creating a LUKS Container for the root partition.
if [ "${use_luks}" = '1' ]; then
output 'Creating LUKS Container for the root partition.'
echo -n "${luks_password}" | cryptsetup luksFormat --pbkdf pbkdf2 "${cryptroot}" -d -
echo -n "${luks_password}" | cryptsetup open "${cryptroot}" cryptroot -d -
BTRFS='/dev/mapper/cryptroot'
else
BTRFS='/dev/disk/by-partlabel/rootfs'
fi
## Formatting the partition as BTRFS.
output 'Formatting the rootfs as BTRFS.'
mkfs.btrfs "${BTRFS}"
mount "${BTRFS}" /mnt
## Creating BTRFS subvolumes.
output 'Creating BTRFS subvolumes.'
btrfs su cr /mnt/@
btrfs su cr /mnt/@/.snapshots
mkdir -p /mnt/@/.snapshots/1
btrfs su cr /mnt/@/.snapshots/1/snapshot
btrfs su cr /mnt/@/boot/
btrfs su cr /mnt/@/home
btrfs su cr /mnt/@/root
btrfs su cr /mnt/@/srv
btrfs su cr /mnt/@/var_log
btrfs su cr /mnt/@/var_crash
btrfs su cr /mnt/@/var_cache
btrfs su cr /mnt/@/var_tmp
btrfs su cr /mnt/@/var_spool
btrfs su cr /mnt/@/var_lib_libvirt_images
btrfs su cr /mnt/@/var_lib_machines
if [ "${install_mode}" = 'desktop' ]; then
btrfs su cr /mnt/@/var_lib_gdm
btrfs su cr /mnt/@/var_lib_AccountsService
fi
if [ "${use_luks}" = '1' ]; then
btrfs su cr /mnt/@/cryptkey
fi
## Disable CoW on subvols we are not taking snapshots of
chattr +C /mnt/@/boot
chattr +C /mnt/@/home
chattr +C /mnt/@/root
chattr +C /mnt/@/srv
chattr +C /mnt/@/var_log
chattr +C /mnt/@/var_crash
chattr +C /mnt/@/var_cache
chattr +C /mnt/@/var_tmp
chattr +C /mnt/@/var_spool
chattr +C /mnt/@/var_lib_libvirt_images
chattr +C /mnt/@/var_lib_machines
if [ "${install_mode}" = 'desktop' ]; then
chattr +C /mnt/@/var_lib_gdm
chattr +C /mnt/@/var_lib_AccountsService
fi
if [ "${use_luks}" = '1' ]; then
chattr +C /mnt/@/cryptkey
fi
## Set the default BTRFS Subvol to Snapshot 1 before pacstrapping
btrfs subvolume set-default "$(btrfs subvolume list /mnt | grep "@/.snapshots/1/snapshot" | grep -oP '(?<=ID )[0-9]+')" /mnt
## Temporarily hardcode the date here, will make it work with proper date later.
echo '<?xml version="1.0"?>
<snapshot>
<type>single</type>
<num>1</num>
<date>1999-03-31 0:00:00</date>
<description>First Root Filesystem</description>
<cleanup>number</cleanup>
</snapshot>' > /mnt/@/.snapshots/1/info.xml
chmod 600 /mnt/@/.snapshots/1/info.xml
## Mounting the newly created subvolumes.
umount /mnt
output 'Mounting the newly created subvolumes.'
mount -o ssd,noatime,compress=zstd "${BTRFS}" /mnt
mkdir -p /mnt/{boot,root,home,.snapshots,srv,tmp,var/log,var/crash,var/cache,var/tmp,var/spool,var/lib/libvirt/images,var/lib/machines}
if [ "${install_mode}" = 'desktop' ]; then
mkdir -p /mnt/{var/lib/gdm,var/lib/AccountsService}
fi
if [ "${use_luks}" = '1' ]; then
mkdir -p /mnt/cryptkey
fi
mount -o ssd,noatime,compress=zstd,nodev,nosuid,noexec,subvol=@/boot "${BTRFS}" /mnt/boot
mount -o ssd,noatime,compress=zstd,nodev,nosuid,subvol=@/root "${BTRFS}" /mnt/root
mount -o ssd,noatime,compress=zstd,nodev,nosuid,subvol=@/home "${BTRFS}" /mnt/home
mount -o ssd,noatime,compress=zstd,subvol=@/.snapshots "${BTRFS}" /mnt/.snapshots
mount -o ssd,noatime,compress=zstd,subvol=@/srv "${BTRFS}" /mnt/srv
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_log "${BTRFS}" /mnt/var/log
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_crash "${BTRFS}" /mnt/var/crash
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_cache "${BTRFS}" /mnt/var/cache
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_tmp "${BTRFS}" /mnt/var/tmp
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_spool "${BTRFS}" /mnt/var/spool
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_libvirt_images "${BTRFS}" /mnt/var/lib/libvirt/images
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_machines "${BTRFS}" /mnt/var/lib/machines
# GNOME requires /var/lib/gdm and /var/lib/AccountsService to be writeable when booting into a readonly snapshot. Thus we sadly have to split them.
if [ "${install_mode}" = 'desktop' ]; then
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_gdm $BTRFS /mnt/var/lib/gdm
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_AccountsService $BTRFS /mnt/var/lib/AccountsService
fi
### The encryption is splitted as we do not want to include it in the backup with snap-pac.
if [ "${use_luks}" = '1' ]; then
mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/cryptkey "${BTRFS}" /mnt/cryptkey
fi
mkdir -p /mnt/boot/efi
mount -o nodev,nosuid,noexec "${ESP}" /mnt/boot/efi
## Pacstrap
output 'Installing the base system (it may take a while).'
output "You may see an error when mkinitcpio tries to generate a new initramfs."
output "It is okay. The script will regenerate the initramfs later in the installation process."
pacstrap /mnt apparmor base chrony efibootmgr firewalld grub grub-btrfs inotify-tools linux-firmware linux-hardened linux-lts nano reflector sbctl snapper sudo zram-generator
if [ "${virtualization}" = 'none' ]; then
CPU=$(grep vendor_id /proc/cpuinfo)
if [[ "${CPU}" == *"AuthenticAMD"* ]]; then
microcode=amd-ucode
else
microcode=intel-ucode
fi
pacstrap /mnt "${microcode}"
fi
if [ "${network_daemon}" = 'networkmanager' ]; then
pacstrap /mnt networkmanager
fi
if [ "${install_mode}" = 'desktop' ]; then
pacstrap /mnt nautilus gdm gnome-console gnome-control-center flatpak pipewire-alsa pipewire-pulse pipewire-jack
elif [ "${install_mode}" = 'server' ]; then
pacstrap /mnt openssh unbound
fi
if [ "${virtualization}" = 'none' ]; then
pacstrap /mnt fwupd
echo 'UriSchemes=file;https' | sudo tee -a /mnt/etc/fwupd/fwupd.conf
elif [ "${virtualization}" = 'kvm' ]; then
pacstrap /mnt qemu-guest-agent
if [ "${install_mode}" = 'desktop' ]; then
pacstrap /mnt spice-vdagent
fi
fi
## Install snap-pac list otherwise we will have problems
pacstrap /mnt snap-pac
## Generate /etc/fstab.
output 'Generating a new fstab.'
genfstab -U /mnt >> /mnt/etc/fstab
sed -i 's#,subvolid=258,subvol=/@/.snapshots/1/snapshot,subvol=@/.snapshots/1/snapshot##g' /mnt/etc/fstab
output 'Setting up hostname, locale and keyboard layout'
## Set hostname.
echo "$hostname" > /mnt/etc/hostname
## Setting hosts file.
echo 'Setting hosts file.'
echo "127.0.0.1 localhost
::1 localhost
127.0.1.1 $hostname.localdomain $hostname" > /mnt/etc/hosts
## Setup locales.
echo "$locale.UTF-8 UTF-8" > /mnt/etc/locale.gen
echo "LANG=$locale.UTF-8" > /mnt/etc/locale.conf
## Setup keyboard layout.
echo "KEYMAP=$kblayout" > /mnt/etc/vconsole.conf
## Configure /etc/mkinitcpio.conf
output 'Configuring /etc/mkinitcpio for ZSTD compression and LUKS hook.'
sed -i 's/#COMPRESSION="zstd"/COMPRESSION="zstd"/g' /mnt/etc/mkinitcpio.conf
sed -i 's/^MODULES=.*/MODULES=(btrfs)/g' /mnt/etc/mkinitcpio.conf
if [ "${use_luks}" = '1' ]; then
sed -i 's/^HOOKS=.*/HOOKS=(systemd autodetect microcode modconf keyboard sd-vconsole block sd-encrypt)/g' /mnt/etc/mkinitcpio.conf
else
sed -i 's/^HOOKS=.*/HOOKS=(systemd autodetect microcode modconf keyboard sd-vconsole block)/g' /mnt/etc/mkinitcpio.conf
fi
## Enable LUKS in GRUB and setting the UUID of the LUKS container.
if [ "${use_luks}" = '1' ]; then
sed -i 's/#GRUB_ENABLE_CRYPTODISK=.*/GRUB_ENABLE_CRYPTODISK=y/g' /mnt/etc/default/grub
fi
## Do not preload part_msdos
sed -i 's/ part_msdos//g' /mnt/etc/default/grub
## Ensure correct GRUB settings
echo '' >> /mnt/etc/default/grub
echo '# Default to linux-hardened
GRUB_DEFAULT="1>2"
Booting with BTRFS subvolume
GRUB_BTRFS_OVERRIDE_BOOT_PARTITION_DETECTION=true' >> /mnt/etc/default/grub
## Disable root subvol pinning.
## This is **extremely** important, as snapper expects to be able to set the default btrfs subvol.
# shellcheck disable=SC2016
sed -i 's/rootflags=subvol=${rootsubvol}//g' /mnt/etc/grub.d/10_linux
# shellcheck disable=SC2016
sed -i 's/rootflags=subvol=${rootsubvol}//g' /mnt/etc/grub.d/20_linux_xen
## Kernel hardening
if [ "${use_luks}" = '1' ]; then
UUID=$(blkid -s UUID -o value "${cryptroot}")
sed -i "s#quiet#rd.luks.name=${UUID}=cryptroot root=${BTRFS} lsm=landlock,lockdown,yama,integrity,apparmor,bpf mitigations=auto,nosmt spectre_v2=on spectre_bhi=on spec_store_bypass_disable=on tsx=off kvm.nx_huge_pages=force nosmt=force l1d_flush=on spec_rstack_overflow=safe-ret gather_data_sampling=force reg_file_data_sampling=on random.trust_bootloader=off random.trust_cpu=off intel_iommu=on amd_iommu=force_isolation efi=disable_early_pci_dma iommu=force iommu.passthrough=0 iommu.strict=1 slab_nomerge init_on_alloc=1 init_on_free=1 pti=on vsyscall=none ia32_emulation=0 page_alloc.shuffle=1 randomize_kstack_offset=on debugfs=off lockdown=confidentiality module.sig_enforce=1#g" /mnt/etc/default/grub
else
sed -i "s#quiet#root=${BTRFS} lsm=landlock,lockdown,yama,integrity,apparmor,bpf mitigations=auto,nosmt spectre_v2=on spectre_bhi=on spec_store_bypass_disable=on tsx=off kvm.nx_huge_pages=force nosmt=force l1d_flush=on spec_rstack_overflow=safe-ret gather_data_sampling=force reg_file_data_sampling=on random.trust_bootloader=off random.trust_cpu=off intel_iommu=on amd_iommu=force_isolation efi=disable_early_pci_dma iommu=force iommu.passthrough=0 iommu.strict=1 slab_nomerge init_on_alloc=1 init_on_free=1 pti=on vsyscall=none ia32_emulation=0 page_alloc.shuffle=1 randomize_kstack_offset=on debugfs=off lockdown=confidentiality module.sig_enforce=1#g" /mnt/etc/default/grub
fi
## Add keyfile to the initramfs to avoid double password.
if [ "${use_luks}" = '1' ]; then
dd bs=512 count=4 if=/dev/random of=/mnt/cryptkey/.root.key iflag=fullblock
chmod 000 /mnt/cryptkey/.root.key
echo -n "${luks_password}" | cryptsetup luksAddKey /dev/disk/by-partlabel/rootfs /mnt/cryptkey/.root.key -d -
sed -i 's#FILES=()#FILES=(/cryptkey/.root.key)#g' /mnt/etc/mkinitcpio.conf
sed -i "s#module\.sig_enforce=1#module.sig_enforce=1 rd.luks.key=/cryptkey/.root.key#g" /mnt/etc/default/grub
fi
## Continue kernel hardening
unpriv curl https://raw.githubusercontent.com/secureblue/secureblue/live/config/files/usr/etc/modprobe.d/blacklist.conf | tee /mnt/etc/modprobe.d/blacklist.conf
if [ "${install_mode}" = 'server' ]; then
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/sysctl.d/99-server.conf | tee /mnt/etc/sysctl.d/99-server.conf
else
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/sysctl.d/99-workstation.conf | tee /mnt/etc/sysctl.d/99-workstation.conf
fi
## Setup NTS
unpriv curl https://raw.githubusercontent.com/GrapheneOS/infrastructure/main/chrony.conf | tee /mnt/etc/chrony.conf
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/sysconfig/chronyd | tee /etc/sysconfig/chronyd
## Remove nullok from system-auth
sed -i 's/nullok//g' /mnt/etc/pam.d/system-auth
## Harden SSH
## Arch annoyingly does not split openssh-server out so even desktop Arch will have the daemon.
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/ssh/ssh_config.d/10-custom.conf | tee /mnt/etc/ssh/ssh_config.d/10-custom.conf
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/ssh/sshd_config.d/10-custom.conf | tee tee /mnt/etc/ssh/sshd_config.d/10-custom.conf
sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /mnt/etc/ssh/sshd_config.d/10-custom.conf
mkdir -p /mnt/etc/systemd/system/sshd.service.d/
unpriv curl https://raw.githubusercontent.com/GrapheneOS/infrastructure/main/systemd/system/sshd.service.d/local.conf | tee /mnt/etc/systemd/system/sshd.service.d/override.conf
## Disable coredump
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/security/limits.d/30-disable-coredump.conf | tee /mnt/etc/security/limits.d/30-disable-coredump.conf
mkdir -p /mnt/etc/systemd/coredump.conf.d
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/systemd/coredump.conf.d/disable.conf | tee /mnt/etc/systemd/coredump.conf.d/disable.conf
# Disable XWayland
if [ "${install_mode}" = 'desktop' ]; then
mkdir -p /mnt/etc/systemd/user/org.gnome.Shell@wayland.service.d
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/systemd/user/org.gnome.Shell%40wayland.service.d/override.conf | tee /mnt/etc/systemd/user/org.gnome.Shell@wayland.service.d/override.conf
fi
# Setup dconf
if [ "${install_mode}" = 'desktop' ]; then
# This doesn't actually take effect atm - need to investigate
mkdir -p /mnt/etc/dconf/db/local.d/locks
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/locks/automount-disable | tee /mnt/etc/dconf/db/local.d/locks/automount-disable
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/locks/privacy | tee /mnt/etc/dconf/db/local.d/locks/privacy
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/adw-gtk3-dark | tee /mnt/etc/dconf/db/local.d/adw-gtk3-dark
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/automount-disable | tee /mnt/etc/dconf/db/local.d/automount-disable
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/button-layout | tee /mnt/etc/dconf/db/local.d/button-layout
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/prefer-dark | tee /mnt/etc/dconf/db/local.d/prefer-dark
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/privacy | tee /mnt/etc/dconf/db/local.d/privacy
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/touchpad | tee /mnt/etc/dconf/db/local.d/touchpad
fi
## ZRAM configuration
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/systemd/zram-generator.conf | tee /mnt/etc/systemd/zram-generator.conf
## Setup unbound
if [ "${install_mode}" = 'server' ]; then
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/unbound/unbound.conf | tee /mnt/etc/unbound/unbound.conf
fi
## Setup Networking
if [ "${install_mode}" = 'desktop' ]; then
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/NetworkManager/conf.d/00-macrandomize.conf | tee /mnt/etc/NetworkManager/conf.d/00-macrandomize.conf
unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/NetworkManager/conf.d/01-transient-hostname.conf | tee /mnt/etc/NetworkManager/conf.d/01-transient-hostname.conf
fi
if [ "${network_daemon}" = 'networkmanager' ]; then
mkdir -p /mnt/etc/systemd/system/NetworkManager.service.d/
unpriv curl https://gitlab.com/divested/brace/-/raw/master/brace/usr/lib/systemd/system/NetworkManager.service.d/99-brace.conf | tee /mnt/etc/systemd/system/NetworkManager.service.d/99-brace.conf
fi
## Configuring the system.
arch-chroot /mnt /bin/bash -e <<EOF
# Setting up timezone
# Temporarily hardcoding here
ln -sf /usr/share/zoneinfo/Etc/UTC /etc/localtime
# Setting up clock
hwclock --systohc
# Generating locales
locale-gen
# Create SecureBoot keys
# This isn't strictly necessary, but linux-hardened preset expects it and mkinitcpio will fail without it
sbctl create-keys
# Generating a new initramfs
chmod 600 /boot/initramfs-linux*
mkinitcpio -P
# Installing GRUB
grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=GRUB --disable-shim-lock
# Creating grub config file
grub-mkconfig -o /boot/grub/grub.cfg
# Adding user with sudo privilege
useradd -m $username
usermod -aG wheel $username
if [ "${install_mode}" = 'desktop' ]; then
# Setting up dconf
dconf update
fi
# Use systemd-resolved for DNS resolution
rm /etc/resolv.conf
ln -s /run/systemd/resolve/stub-resolv.conf /etc/resolv.conf
# Snapper configuration
umount /.snapshots
rm -r /.snapshots
snapper --no-dbus -c root create-config /
btrfs subvolume delete /.snapshots
mkdir /.snapshots
mount -a
chmod 750 /.snapshots
EOF
## Set user password.
[ -n "$username" ] && echo "Setting user password for ${username}." && echo -e "${user_password}\n${user_password}" | arch-chroot /mnt passwd "$username"
## Give wheel user sudo access.
sed -i 's/# %wheel ALL=(ALL:ALL) ALL/%wheel ALL=(ALL:ALL) ALL/g' /mnt/etc/sudoers
## Enable services
systemctl enable apparmor --root=/mnt
systemctl enable chronyd --root=/mnt
systemctl enable firewalld --root=/mnt
systemctl enable fstrim.timer --root=/mnt
systemctl enable grub-btrfsd.service --root=/mnt
systemctl enable reflector.timer --root=/mnt
systemctl enable snapper-timeline.timer --root=/mnt
systemctl enable snapper-cleanup.timer --root=/mnt
systemctl enable systemd-oomd --root=/mnt
systemctl disable systemd-timesyncd --root=/mnt
if [ "${network_daemon}" = 'networkmanager' ]; then
systemctl enable NetworkManager --root=/mnt
else
systemctl enable systemd-networkd --root=/mnt
fi
if [ "${install_mode}" = 'desktop' ]; then
systemctl enable gdm --root=/mnt
systemctl enable systemd-resolved --root=/mnt
fi
if [ "${install_mode}" = 'server' ]; then
systemctl enable sshd.socket --root=/mnt
systemctl enable unbound --root=/mnt
fi
## Set umask to 077.
sed -i 's/^UMASK.*/UMASK 077/g' /mnt/etc/login.defs
sed -i 's/^HOME_MODE/#HOME_MODE/g' /mnt/etc/login.defs
sed -i 's/^USERGROUPS_ENAB.*/USERGROUPS_ENAB no/g' /mnt/etc/login.defs
sed -i 's/umask 022/umask 077/g' /mnt/etc/bash.bashrc
# Finish up
echo "Done, you may now wish to reboot (further changes can be done by chrooting into /mnt)."
exit
View Git Blame Copy Permalink