#!/bin/bash #!/bin/bash # Copyright (C) 2021-2024 Thien Tran, Tommaso Chiti # # Licensed under the Apache License, Version 2.0 (the "License"); you may not # use this file except in compliance with the License. You may obtain a copy of # the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the # License for the specific language governing permissions and limitations under # the License. output(){ echo -e '\e[36m'"$1"'\e[0m'; } unpriv(){ sudo -u nobody "$@" } install_mode_selector() { output "Is this a desktop or server installation?" output "1) Desktop" output "2) Server" read -r -p "Select the installation type: " choice case $choice in 1 ) install_mode=desktop ;; 2 ) install_mode=server ;; * ) output "You did not enter a valid selection." install_mode_selector esac } # Selecting the kernel flavor to install. kernel_selector () { output "List of kernels:" output "1) Stable — Vanilla Linux kernel and modules, with a few patches applied." output "2) Hardened — A security-focused Linux kernel." output "3) Longterm — Long-term support (LTS) Linux kernel and modules." output "4) Zen Kernel — Optimized for desktop usage." read -r -p "Insert the number of the corresponding kernel: " choice output "$choice will be installed" case $choice in 1 ) kernel=linux ;; 2 ) kernel=linux-hardened ;; 3 ) kernel=linux-lts ;; 4 ) kernel=linux-zen ;; * ) output "You did not enter a valid selection." kernel_selector esac } luks_password_prompt () { output "Enter your encryption password (the password will not be shown on the screen):" read -r -s luks_password if [ -z "${luks_password}" ]; then output "You need to enter a password." luks_password_prompt fi output "Confirm your encryption password (the password will not be shown on the screen): " read -r -s luks_password2 if [ "${luks_password}" != "${luks_password2}" ]; then output "Passwords don't match, please try again." luks_password_prompt fi } username_prompt (){ output "Enter your username:" read -r username if [ "${username}" = '' ]; then output "You need to enter a password." username_prompt fi } user_password_prompt () { output "Enter your user password (the password will not be shown on the screen):" read -r -s user_password if [ -z "${user_password}" ]; then output "You need to enter a password." user_password_prompt fi output "Confirm your user password (the password will not be shown on the screen): " read -r -s user_password2 if [ "${user_password}" != "${user_password2}" ]; then output "Passwords don't match, please try again." user_password_prompt fi } # Set hardcoded variables (temporary, these will be replaced by future prompts) locale=en_US kblayout=us # Cleaning the TTY. clear # Initial prompts install_mode_selector kernel_selector luks_password_prompt username_prompt user_password_prompt # Check if this is a VM virtualization=$(systemd-detect-virt) ## Installation ## # Updating the live environment usually causes more problems than its worth, and quite often can't be done without remounting cowspace with more capacity, especially at the end of any given month. pacman -Sy # Installing curl pacman -S --noconfirm curl # Selecting the target for the installation. PS3="Select the disk where Arch Linux is going to be installed: " select ENTRY in $(lsblk -dpnoNAME|grep -P "/dev/sd|nvme|vd"); do DISK=${ENTRY} echo "Installing Arch Linux on ${DISK}." break done # formatting the disk wipefs -af "${DISK}" &>/dev/null sgdisk -Zo "${DISK}" &>/dev/null # Creating a new partition scheme. echo "Creating new partition scheme on ${DISK}." parted -s "${DISK}" \ mklabel gpt \ mkpart ESP fat32 1MiB 128MiB \ set 1 esp on \ mkpart cryptroot 128MiB 100% \ sleep 0.1 ESP="/dev/$(lsblk "${DISK}" -o NAME,PARTLABEL | grep ESP| cut -d " " -f1 | cut -c7-)" cryptroot="/dev/$(lsblk "${DISK}" -o NAME,PARTLABEL | grep cryptroot | cut -d " " -f1 | cut -c7-)" # Informing the Kernel of the changes. echo "Informing the Kernel about the disk changes." partprobe "${DISK}" # Formatting the ESP as FAT32. echo "Formatting the EFI Partition as FAT32." mkfs.fat -F 32 -s 2 "${ESP}" &>/dev/null # Creating a LUKS Container for the root partition. echo "Creating LUKS Container for the root partition." cryptsetup luksFormat --type luks1 ${cryptroot} echo "Opening the newly created LUKS Container." cryptsetup open ${cryptroot} cryptroot BTRFS="/dev/mapper/cryptroot" # Formatting the LUKS Container as BTRFS. echo "Formatting the LUKS container as BTRFS." mkfs.btrfs $BTRFS &>/dev/null mount -o clear_cache,nospace_cache $BTRFS /mnt # Creating BTRFS subvolumes. echo "Creating BTRFS subvolumes." btrfs su cr /mnt/@ &>/dev/null btrfs su cr /mnt/@/.snapshots &>/dev/null mkdir -p /mnt/@/.snapshots/1 &>/dev/null btrfs su cr /mnt/@/.snapshots/1/snapshot &>/dev/null btrfs su cr /mnt/@/boot/ &>/dev/null btrfs su cr /mnt/@/home &>/dev/null btrfs su cr /mnt/@/root &>/dev/null btrfs su cr /mnt/@/srv &>/dev/null btrfs su cr /mnt/@/var_log &>/dev/null btrfs su cr /mnt/@/var_log_journal &>/dev/null btrfs su cr /mnt/@/var_crash &>/dev/null btrfs su cr /mnt/@/var_cache &>/dev/null btrfs su cr /mnt/@/var_tmp &>/dev/null btrfs su cr /mnt/@/var_spool &>/dev/null btrfs su cr /mnt/@/var_lib_libvirt_images &>/dev/null btrfs su cr /mnt/@/var_lib_machines &>/dev/null btrfs su cr /mnt/@/var_lib_gdm &>/dev/null btrfs su cr /mnt/@/var_lib_AccountsService &>/dev/null btrfs su cr /mnt/@/cryptkey &>/dev/null chattr +C /mnt/@/boot chattr +C /mnt/@/srv chattr +C /mnt/@/var_log chattr +C /mnt/@/var_log_journal chattr +C /mnt/@/var_crash chattr +C /mnt/@/var_cache chattr +C /mnt/@/var_tmp chattr +C /mnt/@/var_spool chattr +C /mnt/@/var_lib_libvirt_images chattr +C /mnt/@/var_lib_machines chattr +C /mnt/@/var_lib_gdm chattr +C /mnt/@/var_lib_AccountsService chattr +C /mnt/@/cryptkey #Set the default BTRFS Subvol to Snapshot 1 before pacstrapping btrfs subvolume set-default "$(btrfs subvolume list /mnt | grep "@/.snapshots/1/snapshot" | grep -oP '(?<=ID )[0-9]+')" /mnt cat << EOF >> /mnt/@/.snapshots/1/info.xml single 1 1999-03-31 0:00:00 First Root Filesystem number EOF chmod 600 /mnt/@/.snapshots/1/info.xml # Mounting the newly created subvolumes. umount /mnt echo "Mounting the newly created subvolumes." mount -o ssd,noatime,space_cache,compress=zstd:3 ${BTRFS} /mnt mkdir -p /mnt/{boot,root,home,.snapshots,srv,tmp,/var/log,/var/crash,/var/cache,/var/tmp,/var/spool,/var/lib/libvirt/images,/var/lib/machines,/var/lib/gdm,/var/lib/AccountsService,/cryptkey} mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodev,nosuid,noexec,subvol=@/boot ${BTRFS} /mnt/boot mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodev,nosuid,subvol=@/root ${BTRFS} /mnt/root mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodev,nosuid,subvol=@/home ${BTRFS} /mnt/home mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,subvol=@/.snapshots ${BTRFS} /mnt/.snapshots mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,subvol=@/srv ${BTRFS} /mnt/srv mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodatacow,nodev,nosuid,noexec,subvol=@/var_log ${BTRFS} /mnt/var/log # Toolbox (https://github.com/containers/toolbox) needs /var/log/journal to have dev, suid, and exec, Thus I am splitting the subvolume. Need to make the directory after /mnt/var/log/ has been mounted. mkdir -p /mnt/var/log/journal mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodatacow,subvol=@/var_log_journal ${BTRFS} /mnt/var/log/journal mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodatacow,nodev,nosuid,noexec,subvol=@/var_crash ${BTRFS} /mnt/var/crash mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodatacow,nodev,nosuid,noexec,subvol=@/var_cache ${BTRFS} /mnt/var/cache mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodatacow,nodev,nosuid,noexec,subvol=@/var_tmp ${BTRFS} /mnt/var/tmp mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodatacow,nodev,nosuid,noexec,subvol=@/var_spool ${BTRFS} /mnt/var/spool mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_libvirt_images ${BTRFS} /mnt/var/lib/libvirt/images mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_machines ${BTRFS} /mnt/var/lib/machines # The encryption is splitted as we do not want to include it in the backup with snap-pac. mount -o ssd,noatime,space_cache=v2,compress=zstd:3,discard=async,nodatacow,nodev,nosuid,noexec,subvol=@/cryptkey ${BTRFS} /mnt/cryptkey mkdir -p /mnt/boot/efi mount -o nodev,nosuid,noexec "${ESP}" /mnt/boot/efi # Checking the microcode to install. CPU=$(grep vendor_id /proc/cpuinfo) if [[ $CPU == *"AuthenticAMD"* ]]; then microcode=amd-ucode else microcode=intel-ucode fi # Pacstrap (setting up a base sytem onto the new root). # As I said above, I am considering replacing gnome-software with pamac-flatpak-gnome as PackageKit seems very buggy on Arch Linux right now. echo "Installing the base system (it may take a while)." pacstrap /mnt base ${kernel} ${microcode} linux-firmware grub grub-btrfs snapper snap-pac efibootmgr sudo networkmanager apparmor firewalld zram-generator reflector chrony sbctl openssh fwupd # Generating /etc/fstab. echo "Generating a new fstab." genfstab -U /mnt >> /mnt/etc/fstab sed -i 's#,subvolid=258,subvol=/@/.snapshots/1/snapshot,subvol=@/.snapshots/1/snapshot##g' /mnt/etc/fstab # Setting hostname. read -r -p "Please enter the hostname: " hostname echo "$hostname" > /mnt/etc/hostname # Setting hosts file. echo "Setting hosts file." cat > /mnt/etc/hosts < /mnt/etc/locale.gen echo "LANG=$locale.UTF-8" > /mnt/etc/locale.conf # Setting up keyboard layout. read -r -p "Please insert the keyboard layout you use: " kblayout echo "KEYMAP=$kblayout" > /mnt/etc/vconsole.conf # Configuring /etc/mkinitcpio.conf echo "Configuring /etc/mkinitcpio for ZSTD compression and LUKS hook." sed -i 's,#COMPRESSION="zstd",COMPRESSION="zstd",g' /mnt/etc/mkinitcpio.conf sed -i 's,HOOKS=(base udev autodetect microcode modconf kms keyboard keymap consolefont block filesystems fsck),HOOKS=(base udev autodetect microcode modconf kms keyboard keymap consolefont block encrypt filesystems fsck),g' /mnt/etc/mkinitcpio.conf # Enabling LUKS in GRUB and setting the UUID of the LUKS container. UUID=$(blkid $cryptroot | cut -f2 -d'"') sed -i 's/#\(GRUB_ENABLE_CRYPTODISK=y\)/\1/' /mnt/etc/default/grub echo "" >> /mnt/etc/default/grub echo -e "# Booting with BTRFS subvolume\nGRUB_BTRFS_OVERRIDE_BOOT_PARTITION_DETECTION=true" >> /mnt/etc/default/grub sed -i 's#rootflags=subvol=${rootsubvol}##g' /mnt/etc/grub.d/10_linux sed -i 's#rootflags=subvol=${rootsubvol}##g' /mnt/etc/grub.d/20_linux_xen # Enabling CPU Mitigations curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/etc/default/grub.d/40_cpu_mitigations.cfg -o /mnt/etc/grub.d/40_cpu_mitigations.cfg # Distrusting the CPU curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/etc/default/grub.d/40_distrust_cpu.cfg -o /mnt/etc/grub.d/40_distrust_cpu.cfg # Enabling IOMMU curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/etc/default/grub.d/40_enable_iommu.cfg -o /mnt/etc/grub.d/40_enable_iommu.cfg # Enabling NTS curl https://raw.githubusercontent.com/GrapheneOS/infrastructure/main/chrony.conf -o /mnt/etc/chrony.conf # Setting GRUB configuration file permissions chmod 755 /mnt/etc/grub.d/* # Adding keyfile to the initramfs to avoid double password. dd bs=512 count=4 if=/dev/random of=/mnt/cryptkey/.root.key iflag=fullblock &>/dev/null chmod 000 /mnt/cryptkey/.root.key &>/dev/null cryptsetup -v luksAddKey /dev/disk/by-partlabel/cryptroot /mnt/cryptkey/.root.key sed -i "s#quiet#cryptdevice=UUID=$UUID:cryptroot root=$BTRFS lsm=landlock,lockdown,yama,apparmor,bpf cryptkey=rootfs:/cryptkey/.root.key#g" /mnt/etc/default/grub sed -i 's#FILES=()#FILES=(/cryptkey/.root.key)#g' /mnt/etc/mkinitcpio.conf # Configure AppArmor Parser caching sed -i 's/#write-cache/write-cache/g' /mnt/etc/apparmor/parser.conf sed -i 's,#Include /etc/apparmor.d/,Include /etc/apparmor.d/,g' /mnt/etc/apparmor/parser.conf # Blacklisting kernel modules curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/etc/modprobe.d/30_security-misc.conf -o /mnt/etc/modprobe.d/30_security-misc.conf chmod 600 /mnt/etc/modprobe.d/* # Security kernel settings. curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/usr/lib/sysctl.d/990-security-misc.conf -o /mnt/etc/sysctl.d/990-security-misc.conf sed -i 's/kernel.yama.ptrace_scope=2/kernel.yama.ptrace_scope=3/g' /mnt/etc/sysctl.d/990-security-misc.conf curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/etc/sysctl.d/30_silent-kernel-printk.conf -o /mnt/etc/sysctl.d/30_silent-kernel-printk.conf curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/etc/sysctl.d/30_security-misc_kexec-disable.conf -o /mnt/etc/sysctl.d/30_security-misc_kexec-disable.conf chmod 600 /mnt/etc/sysctl.d/* # Remove nullok from system-auth sed -i 's/nullok//g' /mnt/etc/pam.d/system-auth # Disable coredump echo "* hard core 0" >> /mnt/etc/security/limits.conf # Disable su for non-wheel users bash -c 'cat > /mnt/etc/pam.d/su' <<-'EOF' #%PAM-1.0 auth sufficient pam_rootok.so # Uncomment the following line to implicitly trust users in the "wheel" group. #auth sufficient pam_wheel.so trust use_uid # Uncomment the following line to require a user to be in the "wheel" group. auth required pam_wheel.so use_uid auth required pam_unix.so account required pam_unix.so session required pam_unix.so EOF # ZRAM configuration bash -c 'cat > /mnt/etc/systemd/zram-generator.conf' <<-'EOF' [zram0] zram-fraction = 1 max-zram-size = 8192 EOF # Configuring the system. arch-chroot /mnt /bin/bash -e </dev/null # Setting up clock. hwclock --systohc # Generating locales.my keys aren't even on echo "Generating locales." locale-gen &>/dev/null # Generating a new initramfs. echo "Creating a new initramfs." chmod 600 /boot/initramfs-linux* &>/dev/null mkinitcpio -P &>/dev/null # Snapper configuration umount /.snapshots rm -r /.snapshots snapper --no-dbus -c root create-config / btrfs subvolume delete /.snapshots mkdir /.snapshots mount -a chmod 750 /.snapshots # Installing GRUB. echo "Installing GRUB on /boot." grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=GRUB --modules="normal test efi_gop efi_uga search echo linux all_video gfxmenu gfxterm_background gfxterm_menu gfxterm loadenv configfile gzio part_gpt cryptodisk luks gcry_rijndael gcry_sha256 btrfs" --disable-shim-lock &>/dev/null # Creating grub config file. echo "Creating GRUB config file." grub-mkconfig -o /boot/grub/grub.cfg &>/dev/null # Adding user with sudo privilege if [ -n "$username" ]; then echo "Adding $username with root privilege." useradd -m $username usermod -aG wheel $username groupadd -r audit gpasswd -a $username audit fi EOF # Setting user password. [ -n "$username" ] && echo "Setting user password for ${username}." && echo -e "${user_password}\n${user_password}" | arch-chroot /mnt passwd "$username" &>/dev/null # Giving wheel user sudo access. sed -i 's/# \(%wheel ALL=(ALL\(:ALL\|\)) ALL\)/\1/g' /mnt/etc/sudoers # Change audit logging group echo "log_group = audit" >> /mnt/etc/audit/auditd.conf # Enabling audit service. systemctl enable auditd --root=/mnt &>/dev/null # Enabling openssh server systemctl enable sshd --root=/mnt &>/dev/null # Enabling auto-trimming service. systemctl enable fstrim.timer --root=/mnt &>/dev/null # Enabling NetworkManager. systemctl enable NetworkManager --root=/mnt &>/dev/null # Enabling AppArmor. echo "Enabling AppArmor." systemctl enable apparmor --root=/mnt &>/dev/null # Enabling Firewalld. echo "Enabling Firewalld." systemctl enable firewalld --root=/mnt &>/dev/null # Enabling Reflector timer. echo "Enabling Reflector." systemctl enable reflector.timer --root=/mnt &>/dev/null # Enabling systemd-oomd. echo "Enabling systemd-oomd." systemctl enable systemd-oomd --root=/mnt &>/dev/null # Disabling systemd-timesyncd systemctl disable systemd-timesyncd --root=/mnt &>/dev/null # Enabling chronyd systemctl enable chronyd --root=/mnt &>/dev/null # Enabling Snapper automatic snapshots. echo "Enabling Snapper and automatic snapshots entries." systemctl enable snapper-timeline.timer --root=/mnt &>/dev/null systemctl enable snapper-cleanup.timer --root=/mnt &>/dev/null systemctl enable grub-btrfs.path --root=/mnt &>/dev/null # Setting umask to 077. sed -i 's/022/077/g' /mnt/etc/profile echo "" >> /mnt/etc/bash.bashrc echo "umask 077" >> /mnt/etc/bash.bashrc # Finishing up echo "Done, you may now wish to reboot (further changes can be done by chrooting into /mnt)." exit