#!/bin/bash # Copyright (C) 2021-2024 Thien Tran, Tommaso Chiti # # Licensed under the Apache License, Version 2.0 (the "License"); you may not # use this file except in compliance with the License. You may obtain a copy of # the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the # License for the specific language governing permissions and limitations under # the License. set -u output(){ printf '\e[1;34m%-6s\e[m\n' "${@}" } unpriv(){ sudo -u nobody "$@" } installation_date=$(date "+%Y-%m-%d %H:%M:%S") # Check if this is a VM virtualization=$(systemd-detect-virt) install_mode_selector() { output 'Is this a desktop or server installation?' output '1) Desktop' output '2) Server' output 'Insert the number of your selection:' read -r choice case $choice in 1 ) install_mode=desktop ;; 2 ) install_mode=server ;; * ) output 'You did not enter a valid selection.' install_mode_selector esac } luks_prompt(){ if [ "${virtualization}" != 'none' ]; then output "Virtual machine detected. Do you want to set up LUKS?" output '1) No' output '2) Yes' output 'Insert the number of your selection:' read -r choice case $choice in 1 ) use_luks='0' ;; 2 ) use_luks='1' ;; * ) output 'You did not enter a valid selection.' luks_prompt esac else use_luks='1' fi } luks_password_prompt () { if [ "${use_luks}" = '1' ]; then output 'Enter your encryption password (the password will not be shown on the screen):' read -r -s luks_password if [ -z "${luks_password}" ]; then output 'You need to enter a password.' luks_password_prompt fi output 'Confirm your encryption password (the password will not be shown on the screen):' read -r -s luks_password2 if [ "${luks_password}" != "${luks_password2}" ]; then output 'Passwords do not match, please try again.' luks_password_prompt fi fi } disk_prompt (){ lsblk output 'Please select the number of the corresponding disk (e.g. 1):' select entry in $(lsblk -dpnoNAME|grep -P "/dev/sd|nvme|vd"); do disk="${entry}" output "Arch Linux will be installed on the following disk: ${disk}" break done } username_prompt (){ output 'Enter your username:' read -r username if [ -z "${username}" ]; then output 'You need to enter a username.' username_prompt fi } user_password_prompt () { output 'Enter your user password (the password will not be shown on the screen):' read -r -s user_password if [ -z "${user_password}" ]; then output 'You need to enter a password.' user_password_prompt fi output 'Confirm your user password (the password will not be shown on the screen):' read -r -s user_password2 if [ "${user_password}" != "${user_password2}" ]; then output 'Passwords do not match, please try again.' user_password_prompt fi } hostname_prompt (){ if [ "${install_mode}" = 'server' ]; then output 'Enter your hostname:' read -r hostname if [ -z "${hostname}" ]; then output 'You need to enter a hostname.' hostname_prompt fi else hostname='localhost' fi } network_daemon_prompt(){ if [ "${install_mode}" = 'server' ]; then output 'Which network daemon do you want to use' output '1) networkmanager' output '2) systemd-networkd' output 'Insert the number of your selection:' read -r choice case $choice in 1 ) network_daemon='networkmanager' ;; 2 ) network_daemon='systemd-networkd' ;; * ) output 'You did not enter a valid selection.' install_mode_selector esac else network_daemon='networkmanager' fi } # Set hardcoded variables (temporary, these will be replaced by future prompts) locale=en_US kblayout=us # Cleaning the TTY. clear # Initial prompts install_mode_selector luks_prompt luks_password_prompt disk_prompt username_prompt user_password_prompt hostname_prompt network_daemon_prompt # Installation ## Updating the live environment usually causes more problems than its worth, and quite often can't be done without remounting cowspace with more capacity, especially at the end of any given month. pacman -Sy ## Installing curl pacman -S --noconfirm curl ## Wipe the disk sgdisk --zap-all "${disk}" ## Creating a new partition scheme. output "Creating new partition scheme on ${disk}." sgdisk -g "${disk}" sgdisk -I -n 1:0:+512M -t 1:ef00 -c 1:'ESP' "${disk}" sgdisk -I -n 2:0:0 -c 2:'rootfs' "${disk}" ESP='/dev/disk/by-partlabel/ESP' if [ "${use_luks}" = '1' ]; then cryptroot='/dev/disk/by-partlabel/rootfs' fi ## Informing the Kernel of the changes. output 'Informing the Kernel about the disk changes.' partprobe "${disk}" ## Formatting the ESP as FAT32. output 'Formatting the EFI Partition as FAT32.' mkfs.fat -F 32 -s 2 "${ESP}" ## Creating a LUKS Container for the root partition. if [ "${use_luks}" = '1' ]; then output 'Creating LUKS Container for the root partition.' echo -n "${luks_password}" | cryptsetup luksFormat --pbkdf pbkdf2 "${cryptroot}" -d - echo -n "${luks_password}" | cryptsetup open "${cryptroot}" cryptroot -d - BTRFS='/dev/mapper/cryptroot' else BTRFS='/dev/disk/by-partlabel/rootfs' fi ## Formatting the partition as BTRFS. output 'Formatting the rootfs as BTRFS.' mkfs.btrfs "${BTRFS}" mount "${BTRFS}" /mnt ## Creating BTRFS subvolumes. output 'Creating BTRFS subvolumes.' btrfs su cr /mnt/@ btrfs su cr /mnt/@/.snapshots mkdir -p /mnt/@/.snapshots/1 btrfs su cr /mnt/@/.snapshots/1/snapshot btrfs su cr /mnt/@/boot/ btrfs su cr /mnt/@/home btrfs su cr /mnt/@/root btrfs su cr /mnt/@/srv btrfs su cr /mnt/@/var_log btrfs su cr /mnt/@/var_crash btrfs su cr /mnt/@/var_cache btrfs su cr /mnt/@/var_tmp btrfs su cr /mnt/@/var_spool btrfs su cr /mnt/@/var_lib_libvirt_images btrfs su cr /mnt/@/var_lib_machines if [ "${install_mode}" = 'desktop' ]; then btrfs su cr /mnt/@/var_lib_gdm btrfs su cr /mnt/@/var_lib_AccountsService fi if [ "${use_luks}" = '1' ]; then btrfs su cr /mnt/@/cryptkey fi ## Disable CoW on subvols we are not taking snapshots of chattr +C /mnt/@/boot chattr +C /mnt/@/home chattr +C /mnt/@/root chattr +C /mnt/@/srv chattr +C /mnt/@/var_log chattr +C /mnt/@/var_crash chattr +C /mnt/@/var_cache chattr +C /mnt/@/var_tmp chattr +C /mnt/@/var_spool chattr +C /mnt/@/var_lib_libvirt_images chattr +C /mnt/@/var_lib_machines if [ "${install_mode}" = 'desktop' ]; then chattr +C /mnt/@/var_lib_gdm chattr +C /mnt/@/var_lib_AccountsService fi if [ "${use_luks}" = '1' ]; then chattr +C /mnt/@/cryptkey fi ## Set the default BTRFS Subvol to Snapshot 1 before pacstrapping btrfs subvolume set-default "$(btrfs subvolume list /mnt | grep "@/.snapshots/1/snapshot" | grep -oP '(?<=ID )[0-9]+')" /mnt echo " single 1 ${installation_date} First Root Filesystem number " > /mnt/@/.snapshots/1/info.xml chmod 600 /mnt/@/.snapshots/1/info.xml ## Mounting the newly created subvolumes. umount /mnt output 'Mounting the newly created subvolumes.' mount -o ssd,noatime,compress=zstd "${BTRFS}" /mnt mkdir -p /mnt/{boot,root,home,.snapshots,srv,tmp,var/log,var/crash,var/cache,var/tmp,var/spool,var/lib/libvirt/images,var/lib/machines} if [ "${install_mode}" = 'desktop' ]; then mkdir -p /mnt/{var/lib/gdm,var/lib/AccountsService} fi if [ "${use_luks}" = '1' ]; then mkdir -p /mnt/cryptkey fi mount -o ssd,noatime,compress=zstd,nodev,nosuid,noexec,subvol=@/boot "${BTRFS}" /mnt/boot mount -o ssd,noatime,compress=zstd,nodev,nosuid,subvol=@/root "${BTRFS}" /mnt/root mount -o ssd,noatime,compress=zstd,nodev,nosuid,subvol=@/home "${BTRFS}" /mnt/home mount -o ssd,noatime,compress=zstd,subvol=@/.snapshots "${BTRFS}" /mnt/.snapshots mount -o ssd,noatime,compress=zstd,subvol=@/srv "${BTRFS}" /mnt/srv mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_log "${BTRFS}" /mnt/var/log mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_crash "${BTRFS}" /mnt/var/crash mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_cache "${BTRFS}" /mnt/var/cache mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_tmp "${BTRFS}" /mnt/var/tmp mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_spool "${BTRFS}" /mnt/var/spool mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_libvirt_images "${BTRFS}" /mnt/var/lib/libvirt/images mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_machines "${BTRFS}" /mnt/var/lib/machines # GNOME requires /var/lib/gdm and /var/lib/AccountsService to be writeable when booting into a readonly snapshot. Thus we sadly have to split them. if [ "${install_mode}" = 'desktop' ]; then mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_gdm $BTRFS /mnt/var/lib/gdm mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_AccountsService $BTRFS /mnt/var/lib/AccountsService fi ### The encryption is splitted as we do not want to include it in the backup with snap-pac. if [ "${use_luks}" = '1' ]; then mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/cryptkey "${BTRFS}" /mnt/cryptkey fi mkdir -p /mnt/boot/efi mount -o nodev,nosuid,noexec "${ESP}" /mnt/boot/efi ## Pacstrap output 'Installing the base system (it may take a while).' output "You may see an error when mkinitcpio tries to generate a new initramfs." output "It is okay. The script will regenerate the initramfs later in the installation process." pacstrap /mnt apparmor base chrony efibootmgr firewalld grub grub-btrfs inotify-tools linux-firmware linux-hardened linux-lts nano reflector sbctl snapper sudo zram-generator if [ "${virtualization}" = 'none' ]; then CPU=$(grep vendor_id /proc/cpuinfo) if [[ "${CPU}" == *"AuthenticAMD"* ]]; then microcode=amd-ucode else microcode=intel-ucode fi pacstrap /mnt "${microcode}" fi if [ "${network_daemon}" = 'networkmanager' ]; then pacstrap /mnt networkmanager fi if [ "${install_mode}" = 'desktop' ]; then pacstrap /mnt nautilus gdm gnome-console gnome-control-center flatpak pipewire-alsa pipewire-pulse pipewire-jack elif [ "${install_mode}" = 'server' ]; then pacstrap /mnt openssh unbound fi if [ "${virtualization}" = 'none' ]; then pacstrap /mnt fwupd echo 'UriSchemes=file;https' | sudo tee -a /mnt/etc/fwupd/fwupd.conf elif [ "${virtualization}" = 'kvm' ]; then pacstrap /mnt qemu-guest-agent if [ "${install_mode}" = 'desktop' ]; then pacstrap /mnt spice-vdagent fi fi ## Install snap-pac list otherwise we will have problems pacstrap /mnt snap-pac ## Generate /etc/fstab. output 'Generating a new fstab.' genfstab -U /mnt >> /mnt/etc/fstab sed -i 's#,subvolid=258,subvol=/@/.snapshots/1/snapshot,subvol=@/.snapshots/1/snapshot##g' /mnt/etc/fstab output 'Setting up hostname, locale and keyboard layout' ## Set hostname. echo "$hostname" > /mnt/etc/hostname ## Setting hosts file. echo 'Setting hosts file.' echo "127.0.0.1 localhost ::1 localhost 127.0.1.1 $hostname.localdomain $hostname" > /mnt/etc/hosts ## Setup locales. echo "$locale.UTF-8 UTF-8" > /mnt/etc/locale.gen echo "LANG=$locale.UTF-8" > /mnt/etc/locale.conf ## Setup keyboard layout. echo "KEYMAP=$kblayout" > /mnt/etc/vconsole.conf ## Configure /etc/mkinitcpio.conf output 'Configuring /etc/mkinitcpio for ZSTD compression and LUKS hook.' sed -i 's/#COMPRESSION="zstd"/COMPRESSION="zstd"/g' /mnt/etc/mkinitcpio.conf sed -i 's/^MODULES=.*/MODULES=(btrfs)/g' /mnt/etc/mkinitcpio.conf if [ "${use_luks}" = '1' ]; then sed -i 's/^HOOKS=.*/HOOKS=(systemd autodetect microcode modconf keyboard sd-vconsole block sd-encrypt)/g' /mnt/etc/mkinitcpio.conf else sed -i 's/^HOOKS=.*/HOOKS=(systemd autodetect microcode modconf keyboard sd-vconsole block)/g' /mnt/etc/mkinitcpio.conf fi ## Enable LUKS in GRUB and setting the UUID of the LUKS container. if [ "${use_luks}" = '1' ]; then sed -i 's/#GRUB_ENABLE_CRYPTODISK=.*/GRUB_ENABLE_CRYPTODISK=y/g' /mnt/etc/default/grub fi ## Do not preload part_msdos sed -i 's/ part_msdos//g' /mnt/etc/default/grub ## Ensure correct GRUB settings echo '' >> /mnt/etc/default/grub echo '# Default to linux-hardened GRUB_DEFAULT="1>2" Booting with BTRFS subvolume GRUB_BTRFS_OVERRIDE_BOOT_PARTITION_DETECTION=true' >> /mnt/etc/default/grub ## Disable root subvol pinning. ## This is **extremely** important, as snapper expects to be able to set the default btrfs subvol. # shellcheck disable=SC2016 sed -i 's/rootflags=subvol=${rootsubvol}//g' /mnt/etc/grub.d/10_linux # shellcheck disable=SC2016 sed -i 's/rootflags=subvol=${rootsubvol}//g' /mnt/etc/grub.d/20_linux_xen ## Kernel hardening if [ "${use_luks}" = '1' ]; then UUID=$(blkid -s UUID -o value "${cryptroot}") sed -i "s#quiet#rd.luks.name=${UUID}=cryptroot root=${BTRFS} lsm=landlock,lockdown,yama,integrity,apparmor,bpf mitigations=auto,nosmt spectre_v2=on spectre_bhi=on spec_store_bypass_disable=on tsx=off kvm.nx_huge_pages=force nosmt=force l1d_flush=on spec_rstack_overflow=safe-ret gather_data_sampling=force reg_file_data_sampling=on random.trust_bootloader=off random.trust_cpu=off intel_iommu=on amd_iommu=force_isolation efi=disable_early_pci_dma iommu=force iommu.passthrough=0 iommu.strict=1 slab_nomerge init_on_alloc=1 init_on_free=1 pti=on vsyscall=none ia32_emulation=0 page_alloc.shuffle=1 randomize_kstack_offset=on debugfs=off lockdown=confidentiality module.sig_enforce=1#g" /mnt/etc/default/grub else sed -i "s#quiet#root=${BTRFS} lsm=landlock,lockdown,yama,integrity,apparmor,bpf mitigations=auto,nosmt spectre_v2=on spectre_bhi=on spec_store_bypass_disable=on tsx=off kvm.nx_huge_pages=force nosmt=force l1d_flush=on spec_rstack_overflow=safe-ret gather_data_sampling=force reg_file_data_sampling=on random.trust_bootloader=off random.trust_cpu=off intel_iommu=on amd_iommu=force_isolation efi=disable_early_pci_dma iommu=force iommu.passthrough=0 iommu.strict=1 slab_nomerge init_on_alloc=1 init_on_free=1 pti=on vsyscall=none ia32_emulation=0 page_alloc.shuffle=1 randomize_kstack_offset=on debugfs=off lockdown=confidentiality module.sig_enforce=1#g" /mnt/etc/default/grub fi ## Add keyfile to the initramfs to avoid double password. if [ "${use_luks}" = '1' ]; then dd bs=512 count=4 if=/dev/random of=/mnt/cryptkey/.root.key iflag=fullblock chmod 000 /mnt/cryptkey/.root.key echo -n "${luks_password}" | cryptsetup luksAddKey /dev/disk/by-partlabel/rootfs /mnt/cryptkey/.root.key -d - sed -i 's#FILES=()#FILES=(/cryptkey/.root.key)#g' /mnt/etc/mkinitcpio.conf sed -i "s#module\.sig_enforce=1#module.sig_enforce=1 rd.luks.key=/cryptkey/.root.key#g" /mnt/etc/default/grub fi ## Continue kernel hardening unpriv curl -s https://raw.githubusercontent.com/secureblue/secureblue/live/config/files/usr/etc/modprobe.d/blacklist.conf | tee /mnt/etc/modprobe.d/blacklist.conf > /dev/null if [ "${install_mode}" = 'server' ]; then unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/sysctl.d/99-server.conf | tee /mnt/etc/sysctl.d/99-server.conf > /dev/null else unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/sysctl.d/99-workstation.conf | tee /mnt/etc/sysctl.d/99-workstation.conf > /dev/null fi ## Setup NTS unpriv curl -s https://raw.githubusercontent.com/GrapheneOS/infrastructure/main/chrony.conf | tee /mnt/etc/chrony.conf > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/sysconfig/chronyd | tee /etc/sysconfig/chronyd > /dev/null ## Remove nullok from system-auth sed -i 's/nullok//g' /mnt/etc/pam.d/system-auth ## Harden SSH ## Arch annoyingly does not split openssh-server out so even desktop Arch will have the daemon. unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/ssh/ssh_config.d/10-custom.conf | tee /mnt/etc/ssh/ssh_config.d/10-custom.conf > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/ssh/sshd_config.d/10-custom.conf | tee tee /mnt/etc/ssh/sshd_config.d/10-custom.conf > /dev/null sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /mnt/etc/ssh/sshd_config.d/10-custom.conf mkdir -p /mnt/etc/systemd/system/sshd.service.d/ unpriv curl -s https://raw.githubusercontent.com/GrapheneOS/infrastructure/main/systemd/system/sshd.service.d/local.conf | tee /mnt/etc/systemd/system/sshd.service.d/override.conf > /dev/null ## Disable coredump unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/security/limits.d/30-disable-coredump.conf | tee /mnt/etc/security/limits.d/30-disable-coredump.conf > /dev/null mkdir -p /mnt/etc/systemd/coredump.conf.d unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/systemd/coredump.conf.d/disable.conf | tee /mnt/etc/systemd/coredump.conf.d/disable.conf > /dev/null # Disable XWayland if [ "${install_mode}" = 'desktop' ]; then mkdir -p /mnt/etc/systemd/user/org.gnome.Shell@wayland.service.d unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/systemd/user/org.gnome.Shell%40wayland.service.d/override.conf | tee /mnt/etc/systemd/user/org.gnome.Shell@wayland.service.d/override.conf > /dev/null fi # Setup dconf if [ "${install_mode}" = 'desktop' ]; then # This doesn't actually take effect atm - need to investigate mkdir -p /mnt/etc/dconf/db/local.d/locks unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/locks/automount-disable | tee /mnt/etc/dconf/db/local.d/locks/automount-disable > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/locks/privacy | tee /mnt/etc/dconf/db/local.d/locks/privacy > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/adw-gtk3-dark | tee /mnt/etc/dconf/db/local.d/adw-gtk3-dark > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/automount-disable | tee /mnt/etc/dconf/db/local.d/automount-disable > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/button-layout | tee /mnt/etc/dconf/db/local.d/button-layout > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/prefer-dark | tee /mnt/etc/dconf/db/local.d/prefer-dark > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/privacy | tee /mnt/etc/dconf/db/local.d/privacy > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/touchpad | tee /mnt/etc/dconf/db/local.d/touchpad > /dev/null fi ## ZRAM configuration unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/systemd/zram-generator.conf | tee /mnt/etc/systemd/zram-generator.conf > /dev/null ## Setup unbound if [ "${install_mode}" = 'server' ]; then unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/unbound/unbound.conf | tee /mnt/etc/unbound/unbound.conf > /dev/null fi ## Setup Networking if [ "${install_mode}" = 'desktop' ]; then unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/NetworkManager/conf.d/00-macrandomize.conf | tee /mnt/etc/NetworkManager/conf.d/00-macrandomize.conf > /dev/null unpriv curl -s https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/NetworkManager/conf.d/01-transient-hostname.conf | tee /mnt/etc/NetworkManager/conf.d/01-transient-hostname.conf > /dev/null fi if [ "${network_daemon}" = 'networkmanager' ]; then mkdir -p /mnt/etc/systemd/system/NetworkManager.service.d/ unpriv curl -s https://gitlab.com/divested/brace/-/raw/master/brace/usr/lib/systemd/system/NetworkManager.service.d/99-brace.conf | tee /mnt/etc/systemd/system/NetworkManager.service.d/99-brace.conf > /dev/null fi ## Configuring the system. arch-chroot /mnt /bin/bash -e <