README.md

@@ -23,12 +23,12 @@ The partition layout I use allows us to replicate the behavior found in openSUSE
 1. Snapper rollback <number> works! You will no longer need to manually rollback from a live USB like you would with the @ and @home layout suggested in the Arch Wiki.
 2. You can boot into a readonly snapshot! GDM and other services will start normally so you can get in and verify that everything works before rolling back.
 3. Automatic snapshots on pacman install/update/remove operations
-4. Directories such as `/boot`, `/boot/efi`, `/var/log`, `/var/crash`, `/var/tmp`, `/var/spool`, /`var/lib/libvirt/images` are excluded from the snapshots as they either should be persistent or are just temporary files. `/cryptkey` is excluded as we do not want the encryption key to be included in the snapshots, which could be sent to another device as a backup.
+4. Directories such as /boot, /boot/efi, /var/log, /var/crash, /var/tmp, /var/spool, /var/lib/libvirt/images are excluded from the snapshots as they either should be persistent or are just temporary files. /cryptkey is excluded as we do not want the encryption key to be included in the snapshots, which could be sent to another device as a backup.
-5. GRUB will boot into the default BTRFS snapshot set by snapper. Like on openSUSE, your running system will always be a read-write snapshot in `@/.snapshots/X/snapshot`. 
+5. GRUB will boot into the default BTRFS snapshot set by snapper. Like on openSUSE, your running system will always be a read-write snapshot in @/.snapshots/X/snapshot. 
 
 ### Security considerations
 
-Since this is an encrypted `/boot` setup, GRUB will prompt you for your encryption password and decrypt the drive so that it can access the kernel and initramfs. I am unaware of any way to make it use a TPM + PIN setup.
+Since this is an encrypted /boot setup, GRUB will prompt you for your encryption password and decrypt the drive so that it can access the kernel and initramfs. I am unaware of any way to make it use a TPM + PIN setup.
 
 The implication of this is that an attacker can change your secure boot state with a programmer, replace your grubx64.efi and it will not be detected until its too late.
 

install.sh

@@ -186,10 +186,8 @@ btrfs su cr /mnt/@/var_tmp &>/dev/null
 btrfs su cr /mnt/@/var_spool &>/dev/null
 btrfs su cr /mnt/@/var_lib_libvirt_images &>/dev/null
 btrfs su cr /mnt/@/var_lib_machines &>/dev/null
-if [ "${install_mode}" = 'desktop' ]; then
+btrfs su cr /mnt/@/var_lib_gdm &>/dev/null
-    btrfs su cr /mnt/@/var_lib_gdm &>/dev/null
+btrfs su cr /mnt/@/var_lib_AccountsService &>/dev/null
-    btrfs su cr /mnt/@/var_lib_AccountsService &>/dev/null
-fi
 btrfs su cr /mnt/@/cryptkey &>/dev/null
 
 ## Disable CoW on subvols we are not taking snapshots of
@@ -205,10 +203,8 @@ chattr +C /mnt/@/var_tmp
 chattr +C /mnt/@/var_spool
 chattr +C /mnt/@/var_lib_libvirt_images
 chattr +C /mnt/@/var_lib_machines
-if [ "${install_mode}" = 'desktop' ]; then
+chattr +C /mnt/@/var_lib_gdm
-    chattr +C /mnt/@/var_lib_gdm
+chattr +C /mnt/@/var_lib_AccountsService
-    chattr +C /mnt/@/var_lib_AccountsService
-fi
 chattr +C /mnt/@/cryptkey
 
 ## Set the default BTRFS Subvol to Snapshot 1 before pacstrapping
@@ -230,10 +226,7 @@ chmod 600 /mnt/@/.snapshots/1/info.xml
 umount /mnt
 output 'Mounting the newly created subvolumes.'
 mount -o ssd,noatime,compress=zstd "${BTRFS}" /mnt
-mkdir -p /mnt/{boot,root,home,.snapshots,srv,tmp,var/log,var/crash,var/cache,var/tmp,var/spool,var/lib/libvirt/images,var/lib/machines,cryptkey}
+mkdir -p /mnt/{boot,root,home,.snapshots,srv,tmp,/var/log,/var/crash,/var/cache,/var/tmp,/var/spool,/var/lib/libvirt/images,/var/lib/machines,/var/lib/gdm,/var/lib/AccountsService,/cryptkey}
-if [ "${install_mode}" = 'desktop' ]; then
-    mkdir -p /mnt/{var/lib/gdm,var/lib/AccountsService}
-fi
 mount -o ssd,noatime,compress=zstd,nodev,nosuid,noexec,subvol=@/boot "${BTRFS}" /mnt/boot
 mount -o ssd,noatime,compress=zstd,nodev,nosuid,subvol=@/root "${BTRFS}" /mnt/root
 mount -o ssd,noatime,compress=zstd,nodev,nosuid,subvol=@/home "${BTRFS}" /mnt/home
@@ -254,10 +247,8 @@ mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_li
 mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_machines "${BTRFS}" /mnt/var/lib/machines
 
 # GNOME requires /var/lib/gdm and /var/lib/AccountsService to be writeable when booting into a readonly snapshot. Thus we sadly have to split them.
-if [ "${install_mode}" = 'desktop' ]; then
+mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_gdm $BTRFS /mnt/var/lib/gdm
-    mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_gdm $BTRFS /mnt/var/lib/gdm
+mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_AccountsService $BTRFS /mnt/var/lib/AccountsService
-    mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/var_lib_AccountsService $BTRFS /mnt/var/lib/AccountsService
-fi
 
 ### The encryption is splitted as we do not want to include it in the backup with snap-pac.
 mount -o ssd,noatime,compress=zstd,nodatacow,nodev,nosuid,noexec,subvol=@/cryptkey "${BTRFS}" /mnt/cryptkey
@@ -328,8 +319,7 @@ echo "KEYMAP=$kblayout" > /mnt/etc/vconsole.conf
 ## Configure /etc/mkinitcpio.conf
 output 'Configuring /etc/mkinitcpio for ZSTD compression and LUKS hook.'
 sed -i 's/#COMPRESSION="zstd"/COMPRESSION="zstd"/g' /mnt/etc/mkinitcpio.conf
-sed -i 's/^MODULES=.*/MODULES=(btrfs)/g' /mnt/etc/mkinitcpio.conf
+sed -i 's/^HOOKS=.*/HOOKS=(systemd autodetect microcode modconf kms keyboard sd-vconsole block sd-encrypt filesystems)/g' /mnt/etc/mkinitcpio.conf
-sed -i 's/^HOOKS=.*/HOOKS=(systemd autodetect microcode modconf keyboard sd-vconsole block sd-encrypt)/g' /mnt/etc/mkinitcpio.conf
 
 ## Enable LUKS in GRUB and setting the UUID of the LUKS container.
 sed -i 's/#GRUB_ENABLE_CRYPTODISK=.*/GRUB_ENABLE_CRYPTODISK=y/g' /mnt/etc/default/grub
@@ -358,16 +348,12 @@ sed -i "s#module\.sig_enforce=1#module.sig_enforce=1 rd.luks.key=/cryptkey/.root
 ## Continue kernel hardening
 unpriv curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/etc/modprobe.d/30_security-misc.conf | tee /mnt/etc/modprobe.d/30_security-misc.conf
 sudo sed -i 's/#[[:space:]]*install msr/install msr/g' /mnt/etc/modprobe.d/30_security-misc.conf
-if [ "${install_mode}" = 'server' ]; then
+if [ "${install_mode}" != 'server' ]; then
     sudo sed -i 's/#[[:space:]]*install bluetooth/install bluetooth/g' /mnt/etc/modprobe.d/30_security-misc.conf
     sudo sed -i 's/#[[:space:]]*install btusb/install btusb/g' /mnt/etc/modprobe.d/30_security-misc.conf
 fi
 unpriv curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/usr/lib/sysctl.d/990-security-misc.conf | tee /mnt/etc/sysctl.d/990-security-misc.conf
 sed -i 's/kernel\.yama\.ptrace_scope[[:space:]]*=.*/kernel.yama.ptrace_scope=3/g' /mnt/etc/sysctl.d/990-security-misc.conf
-if [ "${install_mode}" = 'server' ]; then
-    sudo sed -i 's/net\.ipv4\.icmp_echo_ignore_all[[:space:]]*=.*/net.ipv4.icmp_echo_ignore_all=0/g' /mnt/etc/sysctl.d/990-security-misc.conf
-    sudo sed -i 's/net\.ipv6\.icmp.echo_ignore_all[[:space:]]*=.*/net.ipv6.icmp.echo_ignore_all=0/g' /mnt/etc/sysctl.d/990-security-misc.conf
-fi
 unpriv curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/etc/sysctl.d/30_silent-kernel-printk.conf | tee /mnt/etc/sysctl.d/30_silent-kernel-printk.conf
 unpriv curl https://raw.githubusercontent.com/Kicksecure/security-misc/master/etc/sysctl.d/30_security-misc_kexec-disable.conf | tee /mnt/etc/sysctl.d/30_security-misc_kexec-disable.conf
 
@@ -378,39 +364,25 @@ unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/m
 ## Remove nullok from system-auth
 sed -i 's/nullok//g' /mnt/etc/pam.d/system-auth
 
-## Harden SSH
-## Arch annoyingly does not split openssh-server out so even desktop Arch will have the daemon.
-
-unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/ssh/ssh_config.d/10-custom.conf | tee /mnt/etc/ssh/ssh_config.d/10-custom.conf
-unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/ssh/sshd_config.d/10-custom.conf | tee tee /mnt/etc/ssh/sshd_config.d/10-custom.conf
-sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /mnt/etc/ssh/sshd_config.d/10-custom.conf
-mkdir -p /etc/systemd/system/sshd.service.d/
-unpriv curl https://raw.githubusercontent.com/GrapheneOS/infrastructure/main/systemd/system/sshd.service.d/local.conf | tee /mnt/etc/systemd/system/sshd.service.d/override.conf
-
 ## Disable coredump
 unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/security/limits.d/30-disable-coredump.conf | tee /mnt/etc/security/limits.d/30-disable-coredump.conf
 
 # Disable XWayland
-if [ "${install_mode}" = 'desktop' ]; then
+sudo mkdir -p /mnt/etc/systemd/user/org.gnome.Shell@wayland.service.d
-    mkdir -p /mnt/etc/systemd/user/org.gnome.Shell@wayland.service.d
+unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/systemd/user/org.gnome.Shell%40wayland.service.d/override.conf | sudo tee /mnt/etc/systemd/user/org.gnome.Shell@wayland.service.d/override.conf
-    unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/systemd/user/org.gnome.Shell%40wayland.service.d/override.conf | tee /mnt/etc/systemd/user/org.gnome.Shell@wayland.service.d/override.conf
-fi
 
 # Setup dconf
+mkdir -p /mnt/etc/dconf/db/local.d/locks
 
-if [ "${install_mode}" = 'desktop' ]; then
+unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/locks/automount-disable | tee /mnt/etc/dconf/db/local.d/locks/automount-disable
-    mkdir -p /mnt/etc/dconf/db/local.d/locks
+unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/locks/privacy | tee /mnt/etc/dconf/db/local.d/locks/privacy
 
-    unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/locks/automount-disable | tee /mnt/etc/dconf/db/local.d/locks/automount-disable
+unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/adw-gtk3-dark | tee /mnt/etc/dconf/db/local.d/adw-gtk3-dark
-    unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/locks/privacy | tee /mnt/etc/dconf/db/local.d/locks/privacy
+unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/automount-disable | tee /mnt/etc/dconf/db/local.d/automount-disable
-
+unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/button-layout | tee /mnt/etc/dconf/db/local.d/button-layout
-    unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/adw-gtk3-dark | tee /mnt/etc/dconf/db/local.d/adw-gtk3-dark
+unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/prefer-dark | tee /mnt/etc/dconf/db/local.d/prefer-dark
-    unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/automount-disable | tee /mnt/etc/dconf/db/local.d/automount-disable
+unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/privacy | tee /mnt/etc/dconf/db/local.d/privacy
-    unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/button-layout | tee /mnt/etc/dconf/db/local.d/button-layout
+unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/touchpad | tee /mnt/etc/dconf/db/local.d/touchpad
-    unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/prefer-dark | tee /mnt/etc/dconf/db/local.d/prefer-dark
-    unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/privacy | tee /mnt/etc/dconf/db/local.d/privacy
-    unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/dconf/db/local.d/touchpad | tee /mnt/etc/dconf/db/local.d/touchpad
-fi
 
 ## ZRAM configuration
 unpriv curl https://raw.githubusercontent.com/TommyTran732/Linux-Setup-Scripts/main/etc/systemd/zram-generator.conf | tee /mnt/etc/systemd/zram-generator.conf
@@ -448,23 +420,23 @@ arch-chroot /mnt /bin/bash -e <<EOF
 
     # Installing GRUB.
     output "Installing GRUB on /boot."
-    grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=GRUB --disable-shim-lock
+    grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=GRUB --modules="normal test efi_gop efi_uga search echo linux all_video gfxmenu gfxterm_background gfxterm_menu gfxterm loadenv configfile gzio part_gpt cryptodisk luks gcry_rijndael gcry_sha256 btrfs" --disable-shim-lock
 
     # Creating grub config file.
     output "Creating GRUB config file."
     grub-mkconfig -o /boot/grub/grub.cfg
 
     # Adding user with sudo privilege
-    output "Adding $username with root privilege."
+    if [ -n "$username" ]; then
-    useradd -m $username
+        output "Adding $username with root privilege."
-    usermod -aG wheel $username
+        useradd -m $username
-
+        usermod -aG wheel $username
-    if [ "${install_mode}" = 'desktop' ]; then
-        # Setting up dconf
-        output "Setting up dconf."
-        dconf update
     fi
 
+    # Setting up dconf
+    output "Setting up dconf."
+    dconf update
+
     # Snapper configuration
     umount /.snapshots
     rm -r /.snapshots
@@ -479,13 +451,14 @@ EOF
 [ -n "$username" ] && echo "Setting user password for ${username}." && echo -e "${user_password}\n${user_password}" | arch-chroot /mnt passwd "$username" &>/dev/null
 
 ## Give wheel user sudo access.
-sed -i 's/# %wheel ALL=(ALL:ALL) ALL/%wheel ALL=(ALL:ALL) ALL/g' /mnt/etc/sudoers
+sed -i 's/# \(%wheel ALL=(ALL\(:ALL\|\)) ALL\)/\1/g' /mnt/etc/sudoers
 
 ## Enable services
 systemctl enable apparmor --root=/mnt
 systemctl enable chronyd --root=/mnt
 systemctl enable firewalld --root=/mnt
 systemctl enable fstrim.timer --root=/mnt
+systemctl enable gdm.service --root=/mnt
 systemctl enable grub-btrfsd.service --root=/mnt
 systemctl enable NetworkManager --root=/mnt
 systemctl enable reflector.timer --root=/mnt
@@ -503,10 +476,10 @@ if [ "${install_mode}" = 'server' ]; then
 fi
 
 ## Set umask to 077.
-sed -i 's/^UMASK.*/UMASK 077/g' /mnt/etc/login.defs
+sudo sed -i 's/^UMASK.*/UMASK 077/g' /mnt/etc/login.defs
-sed -i 's/^HOME_MODE/#HOME_MODE/g' /mnt/etc/login.defs
+sudo sed -i 's/^HOME_MODE/#HOME_MODE/g' /mnt/etc/login.defs
-sed -i 's/^USERGROUPS_ENAB.*/USERGROUPS_ENAB no/g' /mnt/etc/login.defs
+sudo sed -i 's/^USERGROUPS_ENAB.*/USERGROUPS_ENAB no/g' /mnt/etc/login.defs
-sed -i 's/umask 022/umask 077/g' /mnt/etc/bash.bashrc
+sudo sed -i 's/umask 022/umask 077/g' /mnt/etc/bash.bashrc
 
 # Finish up
 echo "Done, you may now wish to reboot (further changes can be done by chrooting into /mnt)."

update_grub.sh

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-# Copyright (C) 2021-2024 Thien Tran
-# Licensed under the Apache License, Version 2.0 (the "License"); you may not
-# use this file except in compliance with the License. You may obtain a copy of
-# the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations under
-# the License.
-
-# Install new grub version
-sudo grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=GRUB --disable-shim-lock
-
-# Sign grub
-sudo sbctl sign-all
-
-# Disable root subvol pinning.
-## This is **extremely** important, as snapper expects to be able to set the default btrfs subvol.
-# shellcheck disable=SC2016
-sudo sed -i 's/rootflags=subvol=${rootsubvol}//g' /mnt/etc/grub.d/10_linux
-# shellcheck disable=SC2016
-sudo sed -i 's/rootflags=subvol=${rootsubvol}//g' /mnt/etc/grub.d/20_linux_xen
-
-# Generate grub config
-sudo grub-mkconfig -o /boot/grub/grub.cfg