mirror of
https://github.com/PrivSec-dev/privsec.dev
synced 2024-12-22 04:41:33 -05:00
Update
This commit is contained in:
parent
e8b62e23cb
commit
3cdaf86886
@ -9,6 +9,12 @@ While Unbutu supports ZFS on root filesystems with an easy snapshot and rollback
|
||||
|
||||
![ZFSBootMenu](/images/zfsbootmenu.png)
|
||||
|
||||
## Enter the Shell
|
||||
|
||||
Enter the shell on your Ubuntu Installer:
|
||||
|
||||
|
||||
|
||||
## Partitioning the Disk
|
||||
|
||||
Esentially, we need a 512MB ESP partition for ZFSBootMenu and a `/` partition for the rest of the system. If you are using a single disk, just make those 2 partitions on your disk. If you are planning to do mirroring, set up both on of these partitions on each disk.
|
||||
@ -24,10 +30,41 @@ cfdisk /dev/nvme0n2
|
||||
|
||||
## Mirroring the ESP partition
|
||||
|
||||
__Skip this if you are not doing mirroring__
|
||||
_Skip this if you are not doing mirroring_
|
||||
|
||||
While the EFI specs do not support `mdadm`, we can setup mdadm with metadata v1.0, which will be put at the end of the parition and allows it to boot.
|
||||
|
||||
```bash
|
||||
mdadm --create /dev/md0 --level 1 --raid-disks --metadata 1.0 /dev/nvme0n1p1 /dev/nvme0n1p2
|
||||
```
|
||||
|
||||
## Setup the ZFS partition
|
||||
|
||||
This part is mostly based on the [official ZFSBootMenu guide](https://docs.zfsbootmenu.org/en/v2.2.x/guides/ubuntu/uefi.html) with some changes to work around some not-so-great instructions there.
|
||||
|
||||
### Creating the zpool
|
||||
|
||||
#### Getting the Disk ID.
|
||||
|
||||
First, we must get the disk IDs from `/dev/disk/by-id`. The official guide uses the dynamically assigned drive identifier (`/dev/sda`, `/dev/nvme0n1`, etc), which is not what we want to do with zpools, since it will cause problems later on.
|
||||
|
||||
![/dev/disk/by-id](/images/disk-by-id.png)
|
||||
|
||||
#### Installing ZFS-Utils
|
||||
|
||||
```bash
|
||||
sudo apt install zfsutils-linux -y
|
||||
```
|
||||
|
||||
#### Create the encryption key
|
||||
|
||||
```bash
|
||||
echo 'SomeKeyphrase' > /etc/zfs/zroot.key
|
||||
chmod 000 /etc/zfs/zroot.key
|
||||
```
|
||||
|
||||
#### For non-mirroring setup
|
||||
|
||||
```bash
|
||||
sudo zpool create -o ashift=12 -O compression=zstd -O acltype=posixacl -O xattr=sa -O atime=off -O encryption=on -O keylocation=file:///etc/zfs/zroot.key -O keyformat=passphrase -o autotrim=on -m none zroot /dev/disk/by-id/nvme-SAMSUNG_MZQL21T9HCJR-00A07_XXXXXXX-part2
|
||||
```
|
BIN
static/images/disk-by-id.png
Normal file
BIN
static/images/disk-by-id.png
Normal file
Binary file not shown.
After Width: | Height: | Size: 396 KiB |
Loading…
Reference in New Issue
Block a user